Monday, March 13, 2017

Product Review: Two Horse Tack Quick Change Halter Bridle

As a distance rider, I am no stranger to beta biothane and biothane tack. While I do own some leather products, I opt to use my synthetic tack 99.9% of the time no matter the occasion.

Like a few other horse bloggers, I was recently contacted by Two Horse Tack with an opportunity to write a compensated review on some of their beta biothane tack. Last year I won a raffle for a THT grooming halter that has been a life-saver during mud season so it was a no brainer to jump at a chance to check out what other products the company had to offer.

Since I currently ride in a rope halter with snap-on headstall combo, I decided to do a review on the Quick Change Halter Bridle with Snap On Browband. The majority of my riding is done out on the trails for hours at a time, so I'm all about functionality, efficiency, and comfort. The Quick Change Halter Bridle offers a lot of functionality since the halter and snap-on headstall can be used separately or together in a variety of configurations. The flexibility is good to have for the kind of riding I do and I like the fact it can be used with a separate rope halter if/when I need it.

Ordering & Arrival
When ordering, I admit there was some hesitation on my end when it came to sizing. The size category descriptions on the store website were not that useful and it doesn't help that Quest doesn't quite fit into any single category with her Saddlebred-head and dainty Arab-nose. However since Two Horse Tack's products are made-to-order, I opted to provide specific measurements when placing my order and kept my fingers crossed that the new set would fit with minimal adjustments.

Less than two weeks after placing the order, I had the final product in my hands. As a freelance artist, I can say from experience that is a VERY impressive turnaround time for a custom, made-to-order item.

10' trail reins, snap-on head stall, and halter
My initial impressions were very positive. I requested the set made in my endurance riding colors and the purple beta biothane with orange biothane overlay contrasted really nicely together. The overall construction felt solid, the stitching appeared tight, and there was a decent amount of punched holes for adjustments on both the headstall and halter pieces using the stainless steel hardware. Also I was pleased to see that the halter fastened on with a clip instead of a buckle (which faced outward, yes thank you). I'm not big fan of buckles in general because cold fingers + buckles during the winter = zero fun. I ride in almost every weather so this is the stuff I notice lol

The matching trail reins were a nice add-on and definitely completed the look. The 10ft length is standard for trail riding which works well with Quest's long neck (yay Saddlebred) and can handily double up as a lead line that clips to the halter when I want to hop off and walk on the trail.

Fitting & Test Ride
As the saying goes though, "pretty is as pretty does" so it was time to see how everything actually worked. I had planned to test the tack on the trail but it was absolutely frigid that day so the indoor arena it was for now.

As I had hoped, there were ZERO size adjustments to make on the halter or headstall. Literally all I had to do was attach the bit and we were ready to ride.

I was especially happy to see how sleek the set fit Quest without extraneous stuff and space all over. The beta biothane feels super durable yet it is supple enough to allow the bit to sit naturally on her face instead of pulling it stiffly (and probably uncomfortably) out to the sides. I had that issue with a biothane halter bridle with bit hangers from Running Bear and I sold that as soon as possible.


Unsurprisingly, the test ride was also complete nonevent. Quest went in it happily w/t/c as if it was just another arena session and had no complaints. I was pretty content as a rider too- the reins felt great in my hands and didn't cause any discomfort. I have eczema and depending on how abrasive the rein material is, my hands can get painful rashes. I typically deal with it by wearing riding gloves but it's not an ideal solution in hot, humid, or wet weather. The reins were thinner than what I'm used to but that did not detract from comfort or the fact that no gloves were needed.


***
Overall the Quick Change Halter Bridle with Snap-On Browband from Two Horse Tack is a great option for those who want to get as much use as possible out of a single piece of tack. The base price for this halter bridle style with the biothane overlay starts at $80 which is very reasonable for the quality you get. A set of matching reins are $20 extra and well worth it in my opinion. Also if you have any hesitation or worry about sizing when placing an order, I strongly suggest selecting the "Custom" option and including measurements; the tack will be made-to-order anyway and it's just one less thing to worry about.

I hope this review helps folks who are on the fence about trying synthetic tack and/or looking for companies to purchase from. As for me, I've been very impressed with Two Horse Tack so far and will be shopping with them for my future beta biothane tack needs.

12 comments:

  1. the set looks great on her - esp the fit! i've really enjoyed reading everyone's reviews and am hopeful to have a review of my own in the near future too!

    ReplyDelete
    Replies
    1. Yeah I actually got a few compliments at the barn about how nicely it fit- can't go wrong with measurements. Excited to read your review!

      Delete
  2. LOVE how your set turned out! I think I definitely may try a setup like this in the future after seeing how nice it looks. I like the option to use with rope halter like you mention.

    ReplyDelete
    Replies
    1. The snap-on headstall combo is my default tack setup <3 I tried using bit hangers at first but it was too much finagling- I always had difficulty trying to attach the bit hanger clip on the offside lol Maybe I'm just really uncoordinated..

      Delete
  3. Replies
    1. Thank you! And I'm glad to hear it wasn't too over the top haha it's easy to get carried away with custom tack design

      Delete
  4. Gah. I love your colors on this.

    ReplyDelete
    Replies
    1. Thanks! I'm so glad the colors ended up balancing and contrasted quite nicely as a full set

      Delete
  5. Sorry to come on and comment randomly. Just a saftey thought. You may want to drop the cheek piece buckle and raise the strap at the bit ring. Those little buckles (Conway buckles) aren't secure unless the strap passes through/under both sides. I think you can see in this.
    https://jmbcanada.com/collections/all-accessories/products/bracelet-conway-single-bark-brown

    ReplyDelete
    Replies
    1. I noticed that as well during my second test ride with the set; it didn't present a problem during the initial ride but just in case, it has been fixed!

      Delete
  6. Thanks for giving such a great information about horse products
    Your products are really good to use
    I'm very crazy about horses
    keep doing well
    wholesale halters manufacturer

    ReplyDelete
  7. Horse Tack I would like to say that this blog really convinced me to do it! Thanks, very good post.

    ReplyDelete